PIR FOR GC Instrument

LABIN Designs especially for Analytical/Chromatography Instruments.

Benefit:

• Increase column life, GC detector life
• Reduce flame problems
• Less GC maintenance
• Reduce baseline noise, drift problems

Features:

• Powder coated, compact & wall mountable
• Traps are easily detachable & Replaceable
• Remove impurities in gases
• Improve system performance
• Indicate both pressure Inlet & Outlet
• you can control & set outlet pressure

GASES: AIR/N2/H2/HE/AR OR OTHER GASES

• Model: 1- Stage (for any one gas)
• Model: 2- Stage (for any two gases)
• Model: 3- Stage (for any three gases)
• Model: 4- Stage (for any four gases)

Gas Cylinders

• Instrument Grade AIR/N2/H2/He/AR gas cylinders

Brand new, filled gas cylinders outright sale with following documents

• Gas Purity Test Certificates
• ISI Inspection / Test Certificate
• Cylinder Hydraulic Test Certificate
• Approval Certificate from chief controller of Explosives, Govt. of India

Holding Bracket

• If you are going to remove the Cylinder from the trolley and going to place it free (Loose) in the Lab / Floor, It is highly recommended that you keep them fastened with wall Mounting Brackets in order to avoid fall of cylinders accidentally.

MOC
M.S. Fabricated and Epoxy powder coated with Cylinder supporting Safety Chain for securing the heavy cylinders of 47 Ltr. WC

LABIN GDP to provide for an equal distribution of each of GC gases like Air, N2, H2, He, Ar. & others. Especially uses for more than one GC Instruments.

LABIN Provide 3 types of Model as per below. Model: T, TG, TGR

• Model: T  (Only Shut-Off Valve)
• Model: TG (Only Shut-Off Valve & Pressure gauge)
• Model: TGR (Shut-Off Valve, Pressure gauge & Regulator)

Gas Selector Panel
LABIN Make Gas Selector Panel for changing the outlet carrier gas flow either Nitrogen or Helium gas without halting your analysis.

LABIN Make High and Low Pressure Cylinder Regulators for Toxic/Corrosive/Flammable/inert gases.

MOC
Brass c.p./ SS304 / SS316L

Details

• Two Stages and Single Stages Diaphragm / Piston Types
• Design for  High & Low  working pressure
• Inbuilt Safety Relief Valve as per safety norms
• Indicates both Cylinder & Outlet Pressure
• Inbuilt dust filters at Inlet

LABIN Make IMF use for to Remove dust particles up to 0.5 micron from inert gases

Tubing
As per ASTM Standard SS304/ SS316, 1/8” OR  ¼” OD, Instrumentation Tubing's with color coded sleeves, (Free from Oil & Grease, dust & other foreign material). Specially uses for Lab application.

Casing/Capping

• PVC / ALUMINUM
• PVC- Regular PVC Casing-Capping
• AL- Epoxy powder coated Casing and Capping for covered S.S. Tubing from polluted environment

Standard Fitting Kit
1/8” / 1/4” OD Swagelok type SS Nut and Locking ferrules, Equal Tee, Equal Union and Misc. Hardware like Screws, Nails, drill bits, Teflon Tape etc.

High Pressure Gas Manifold
In this system if one cylinder gets empty we can immediately switch on to another cylinder (Manually/Auto) without halting the analysis and without dismantling the regulators from the empty cylinder.

Models

• Mechanical-Manual (1 or 2 Cyl.)
• Mechanical- Semi Auto
• Digital- Fully Auto Gas Monitoring System
• Manual / Semi Auto / Fully Auto: 1, 2, 3……….. no. of Cylinders

High Pressure Pigtails
MOC: ¼” ID x 1 mtr. Long plain teflon tube with outer SS Wire braiding. Both end 5/8” BSP [RH/LH] Male Bull Nozzle as per IS: 3224 Connect for Cylinder to Manifold

High Pressure Pigtails Types

• Type-1: Without safety Roap
• Type-2: With safety Roap

Types

• Only Zero Air
• Only Nitrogen
• Zero Air & N2 Combo
• Only Hydrogen